Product Details
Place of Origin: China
Brand Name: LINK-PP
Certification: UL,ROHS,Reach,ISO
Model Number: 0826-1X1T-GJ-F
Document: LPJK6003AONL.pdf
Payment & Shipping Terms
Minimum Order Quantity: 50/500/1000
Price: $ 1.68
Packaging Details: 50pcs/tray,1200pcs/carton
Delivery Time: in Stock
Payment Terms: TT,NET30/60/90 Days
Supply Ability: 4600K.PCS/Month
Part Number: |
0826-1X1T-GJ-F |
Product Type: |
Integrated Connector Module |
Number Of Ports: |
1×1 |
Speed: |
10/100BASE-T |
PoE Rating: |
PoE+ 30W |
Port Configuration: |
Tab Up |
Mounting Type: |
Through Hole |
EMI Tabs: |
Yes |
LED Type: |
OG/Y |
Operating Temperature: |
-40°C To +85°C |
Part Number: |
0826-1X1T-GJ-F |
Product Type: |
Integrated Connector Module |
Number Of Ports: |
1×1 |
Speed: |
10/100BASE-T |
PoE Rating: |
PoE+ 30W |
Port Configuration: |
Tab Up |
Mounting Type: |
Through Hole |
EMI Tabs: |
Yes |
LED Type: |
OG/Y |
Operating Temperature: |
-40°C To +85°C |
The Bel Fuse 0826-1X1T-GJ-F is a single-port (1x1) Integrated Connector Module (ICM) designed for rugged industrial Fast Ethernet and Power over Ethernet Plus (PoE+ / IEEE 802.3at) deployments. Featuring integrated magnetics with a 1CT:1CT turns ratio, an extended operating temperature range of -40°C to +85°C, and a standard Tab-Up profile, this connector delivers continuous power up to 720 mA @ 57 VDC (30 W) while ensuring 2250 VDC dielectric isolation.
| Parameter | Specification Value | Test Condition / Notes |
|---|---|---|
| Turns Ratio (TP1 & TP2) | 1CT : 1CT (±2%) | Transmit & Receive Channels |
| Open Circuit Inductance (OCL) | 350 μH Min. | @ 100 kHz, 100 mVrms, 11 mA DC Bias |
| Insertion Loss | -1.1 dB Max. (0.1–1 MHz) -0.8 dB Max. (1–65 MHz) -1.2 dB Max. (65–100 MHz) |
Across Operating Frequency |
| Return Loss | -18 dB Min. (0.5–40 MHz) -(12 + 20 log(f/80 MHz)) dB (40–100 MHz) |
System Impedance: 100 Ω |
| Common Mode Rejection (CM to CM) | -30 dB Min. | 100 kHz–100 MHz |
| Common Mode to Differential Mode Rejection (CM to DM) | -35 dB Min. | 100 kHz–100 MHz |
| Balanced DC Line Current | 720 mA Max. Continuous @ 57 VDC 1.2 A Max. for 200 ms @ 57 VDC |
Designed for IEEE 802.3at PoE+ Applications |
| High Potential (HiPot) Isolation | 2250 VDC | 100% Production Tested |
![]()
![]()
![]()
The unit integrates four internal 75 Ω termination resistors, four 22 nF / 100 V DC-blocking capacitors, and a 1000 pF / 2 kV high-voltage capacitor connected to the outer shield as part of the Bob Smith termination network.
When routing the PCB, keep high-speed Ethernet differential pairs away from noisy power traces and switching nodes, particularly beneath and around the connector keep-out area. Maintaining separation from high-dV/dt and high-current paths helps reduce common-mode noise coupling and preserves signal integrity.
The PoE power paths are brought out through dedicated VC connections on Pins 13, 14, 15, and 16. These pins provide access to the relevant Ethernet cable-pair power paths for external PoE PD or PSE circuitry.
Use sufficiently wide copper traces or planes for the PoE current path and size the PCB copper according to the required current, copper thickness, allowable temperature rise, and routing length. The reference device supports up to 720 mA balanced DC line current continuously at 57 VDC, so the surrounding PCB power path should be designed with adequate current-carrying margin.
Avoid narrow neck-downs, excessive via resistance, and unnecessary routing transitions in the PoE current path, as these can increase localized heating and voltage drop.
Ensure that all shield and retention tabs make a short, low-impedance connection to the intended chassis ground or peripheral shield-ground structure.
Proper shield grounding helps provide an effective path for common-mode noise and improves EMI performance at the Ethernet cable interface. Keep shield-current paths short and direct, and avoid routing shield return currents through sensitive digital or analog ground regions whenever possible.
The final grounding method should be coordinated with the system-level chassis, PCB ground architecture, ESD protection strategy, and EMC requirements.
No. The 0826-1X1T-GJ-F is engineered specifically for 10/100BASE-T (Fast Ethernet) networks. If your application requires Gigabit speeds (1000BASE-T), you must select an 8-channel/4-pair Gigabit MagJack series rather than this 2-pair variant.
The connector supports PoE+ (IEEE 802.3at / Type 2) delivering up to 30 Watts. It handles a balanced continuous line current of 720 mA @ 57 VDC and peak inrush current of up to 1.2 A @ 57 VDC for 200 ms.
The 0826-1X1T-GJ-F features a Tab-Up (Latch Up) port orientation. This design allows easy cable disengagement from the top, which is particularly beneficial for DIN-rail and baseboard mounted hardware where bottom clearances are limited.
LED 1 (Pins 17/18) is a single-color yellow LED. LED 2 (Pins 19/20) is a bi-color LED emitting orange when Pin 19 is positive and green when Pin 20 is positive. Both operate at standard 20 mA forward drive currents.