Product Details
Place of Origin: GuangDong, China
Brand Name: LINK-PP
Certification: UL File E484635; RoHS 2011/65/EU
Model Number: 0862-1J1T-43-F
Document: LPJU4232A64NL.pdf
Payment & Shipping Terms
Minimum Order Quantity: 50/500/1000/60K
Price: $0.55-$1.2
Packaging Details: Tray
Delivery Time: 3-5 Working Days
Payment Terms: TT,NET30/60/90 Days
Supply Ability: 180K/Month
Part Number: |
0862-1J1T-43-F |
LINK-PP Part Number: |
LPJU4232A64NL |
Speed: |
1000BASE-T |
Interface: |
RJ45 (8P8C) + 2x USB 2.0 |
Mounting Type: |
Through Hole |
LED Type: |
3-wire Bi-Color OG + Yellow |
Port Configuration: |
Tab Up And USB |
Dimensions: |
26.09 X 16.92 X 29.72 Mm |
Insertion Loss: |
-1.0 DB Max (100MHz) |
PoE Rating: |
Non PoE |
Isolation HiPot: |
1500 Vrms MIN |
Turns Ratio: |
1CT:1CT (All 4 Pairs) |
Part Number: |
0862-1J1T-43-F |
LINK-PP Part Number: |
LPJU4232A64NL |
Speed: |
1000BASE-T |
Interface: |
RJ45 (8P8C) + 2x USB 2.0 |
Mounting Type: |
Through Hole |
LED Type: |
3-wire Bi-Color OG + Yellow |
Port Configuration: |
Tab Up And USB |
Dimensions: |
26.09 X 16.92 X 29.72 Mm |
Insertion Loss: |
-1.0 DB Max (100MHz) |
PoE Rating: |
Non PoE |
Isolation HiPot: |
1500 Vrms MIN |
Turns Ratio: |
1CT:1CT (All 4 Pairs) |
The Bel Fuse 0862-1J1T-43-F is a patented 3-in-1 hybrid I/O Integrated Connector Module (ICM) combining a single-port 1000BASE-T (Gigabit Ethernet) RJ45 MagJack and two stacked USB 2.0 Type-A Female receptacles into a compact vertical through-hole (THT) package.
Crucially designed in a Tab-Up (Latch Up) port orientation, it ensures ergonomic cable latch disengagement without interfering with the lower USB ports. Rated for commercial environments from 0°C to +70°C, it delivers 1500 Vrms dielectric isolation and an ultra-low insertion loss of -1.0 dB Max across all 4 differential pairs. Equipped with 3-wire Bi-Color Orange/Green and Yellow status LEDs (3w-OG/Y) and an internal grounded Faraday shield partition separating USB and Ethernet signals.
The Bel 0862-1J1T-43-F is a 1×1 Gigabit Ethernet MagJack stacked above two USB Type-A receptacles. Its Ethernet section uses four 1CT:1CT ±2% transformer channels with 350 µH minimum OCL at 8 mA DC bias, -1.2 dB maximum insertion loss from 1 to 100 MHz and 1500 Vrms isolation.
LINK-PP LPJU4232A64NL can be evaluated as a cross-reference option. Replacement approval should verify the PCB footprint, pin assignment, magnetics, LEDs, USB connections and mechanical interface against the controlled drawings.
Typical Applications of 1000BASE-T RJ45 Dual USB Jack include network appliances, routers, embedded motherboards, industrial PCs, communication gateways, multimedia systems, control equipment and other products requiring Gigabit Ethernet plus local USB connectivity from one panel location.
| Parameter | Specification |
|---|---|
| Original Reference P/N | Bel 0862-1J1T-43-F |
| LINK-PP Cross-Reference | LPJU4232A64NL |
| Connector Type | RJ45 + Dual USB Type-A Combo |
| Ethernet | 10/100/1000BASE-T |
| Magnetic Channels | 4 |
| Integrated Magnetics | Yes |
| RJ45 Configuration | 1×1, 8P8C |
| USB Configuration | 2 × USB Type-A |
| Orientation | Right Angle / Side Entry |
| Latch Orientation | Tab Up |
| PCB Mounting | Through Hole |
| PoE | Non-PoE |
| Shield | Nickel-Plated Copper Alloy |
| EMI Tabs | Yes |
| LEDs | Orange / Green / Mixed Yellow + Yellow |
| Operating Temperature | 0°C to +70°C |
| Original Bel Profile | Standard |
| Engineering Parameter | Bel Drawing Specification | Test Condition |
|---|---|---|
| Turns Ratio TP1 | 1CT:1CT ±2% | Transformer Channel 1 |
| Turns Ratio TP2 | 1CT:1CT ±2% | Transformer Channel 2 |
| Turns Ratio TP3 | 1CT:1CT ±2% | Transformer Channel 3 |
| Turns Ratio TP4 | 1CT:1CT ±2% | Transformer Channel 4 |
| Open Circuit Inductance | 350 µH Minimum | 100 kHz, 100 mVrms, 8 mA DC Bias |
| Insertion Loss | -1.2 dB Maximum | 1 MHz–100 MHz |
| Return Loss | -18 dB Minimum | 0.5 MHz–40 MHz, 100 Ω ±15% |
| Return Loss | -12 + 20LOG(f/80MHz) dB | 40 MHz–100 MHz |
| Crosstalk | -35 dB Minimum | 1 MHz–30 MHz |
| Crosstalk | -24 dB Minimum | 30 MHz–80 MHz |
| Crosstalk | -25 dB Minimum | 80 MHz–100 MHz |
| CM-to-CM Rejection | -30 dB Minimum | 100 kHz–100 MHz |
| CM-to-DM Rejection | -35 dB Minimum | 100 kHz–100 MHz |
| Isolation Voltage | 1500 Vrms or 2250 VDC | PHY Side to Cable Side |
| Production HiPot | 100% Tested | Production Test |
The original Bel schematic includes a cable-side common-mode termination network consisting of: 4 × 75 Ω resistors + 1000 pF / 2 kV capacitor to shield
This circuit is part of the original MagJack design and should be included when comparing electrical cross-references.
A matching PCB footprint alone does not prove equivalent common-mode behavior.
| Mechanical Parameter | 0862-1J1T-43-F Drawing |
|---|---|
| Overall Height | 29.72 mm |
| Maximum Depth | 26.09 mm |
| Maximum Front Width | 17.09 mm |
| Main Housing Width | 16.00 ±0.76 mm |
| RJ45 Opening Width | 13.46 ±0.76 mm |
| Suggested Panel Opening | 17.78 × 30.10 mm |
| Suggested Panel Setback | 2.03 mm |
| Mounting | Through Hole |
| Orientation | Right Angle |
| RJ45 Latch | Tab Up |
The 0862-1J1T-43-Fdrawing provides a dedicated component-side recommended PCB footprint with separate holes for:
| RJ45 Pin | Signal |
|---|---|
| 1 | TRP1+ |
| 2 | TRP1− |
| 3 | TRP2+ |
| 6 | TRP2− |
| 4 | TRP3+ |
| 5 | TRP3− |
| 7 | TRP4+ |
| 8 | TRP4− |
The original design contains one Yellow LED and one three-wire multi-color LED.
| Pin 11 | Pin 12 | Color |
|---|---|---|
| − | + | Yellow |
| Pin 15 | Pin 14 | Pin 13 | Color |
|---|---|---|---|
| − | + | — | Orange |
| — | + | − | Green |
| − | + | − | Mixed Yellow |
| LED Color | Typical Forward Voltage | Typical Dominant Wavelength |
|---|---|---|
| Yellow | 2.1 V @ 20 mA | 590 nm |
| Yellow-Green | 2.2 V @ 20 mA | 570 nm |
| Amber / Orange | 2.1 V @ 20 mA | 607 nm |
| Mixed Yellow | — | No single specified wavelength |
For a replacement, LED color alone is insufficient. Pin polarity and common-pin arrangement must also match.
The 0862-1J1T-43-F integrates two Type-A USB receptacles below the RJ45 interface.
| USB Parameter | Specification |
|---|---|
| Insulation Resistance | 1000 MΩ Minimum |
| Contact Resistance | 25 mΩ Maximum |
| Dielectric Withstanding | 750 VAC |
| Mating Force | 35 N Maximum |
| Unmating Force | 10 N Minimum |
| Contact Material | Phosphor Bronze |
| Contact Area Plating | 30 µin Gold |
| Solder Tail Finish | Lead-Free Tin |
The USB circuits are electrically separate from the integrated Ethernet isolation magnetics.
| Component | Original Bel Specification |
|---|---|
| Plastic Housing | Thermoplastic PBT |
| Flammability | UL 94V-0 |
| RJ45 Contact Plating | 30 µin Hard Gold |
| RJ45 Pins | Tin-Coated Copper Wire |
| Pin Diameter | 0.018 in |
| Shield | Nickel-Plated Copper Alloy |
| Shield Ground Leads | Solder Dipped |
| USB Contact Material | Phosphor Bronze |
| USB Contact Plating | 30 µin Gold |
| USB Solder Tail | Lead-Free Tin |
Both connectors share the identical 1000BASE-T Gigabit magnetics, Tab-Up orientation, dual USB 2.0 ports, 18.08 × 30.43 mm panel cutout, and 3-wire Bi-Color Orange/Green + Yellow LEDs. The primary distinction is the operating temperature range: 0862-1J1T-43-F is rated for 0°C to +70°C (Commercial Grade) for cost-optimized indoor systems, whereas 0862-1J1T-46A-F is rated for -40°C to +85°C (Industrial Grade).
In stacked triple-port connectors, the RJ45 port sits directly above two USB ports. A Tab-Up (Latch Up) orientation positions the cable release clip on the top face of the connector, allowing operators to easily release the RJ45 cable with their thumb without their fingers hitting the lower USB cables.
No. It is a Non-PoE Gigabit combo connector. The internal magnetics are dedicated purely to high-speed Fast/Gigabit Ethernet data transmission, while the two USB 2.0 ports supply standard 5V USB bus power (up to 1.5 A per port).
Tags:
